KVC370 Plus Glass Cutter - Precision Manual ITO Glass Cutting Tool with Silica Gel Base (28x33cm) for Laboratory, Craft & DIY Projects | Ideal for Thin Glass, Display Panels & Electronic Repair

Laboratory Use Glass Cutter Manual ITO Glass Based Silica Gel Board Cutting Machine 28x33CMSpecification: Minimum scale: 1mm Workbench working area: 28cm*33cm Cutter bottom plate size: 37cm*37cm Cutting thickness: each set is also equipped with a cutting head that can cut glass thickness of 1-3mm (the original cutter head is also this model), and 0.5-1.5mm, which can be replaced according to the needs of use. Note:Do not use to cut metal or ceramics, cutting metal or ceramics will cause the blade to dull rapidly. Cutting glass thickness recommended by the cutter head: KV-CW-001: Can cut glass thickness 0.5-1.5mm (It is recommended to cut glass with a thickness of 0.5-1mm.) KV-CW-003: Can cut glass thickness 1-3mm (It is recommended to cut glass with a thickness of 1-2mm.) Description: 1. The laboratory glass cutter has the advantages of convenient operation and high cutting precision. 2. It is suitable for cutting small-area conductive glass for laboratory use, thin glass base for laboratory use, silicon wafer, glass-based silica gel plate and the like. 3. KV-C-370 glass cutter uses PMMA plate as the bottom plate of the cutter, which has good flatness and wear resistance. 4. KV-C-370Plus is an upgrade on the basis of KV-C-370. 5. KV-C-370Plus uses a frosted PMMA plate as the bottom plate of the cutter (the cutting table is frosted), which has good flatness and wear resistance, and is scratch-resistant and non-stick. glass, etc. Package included: 1x laboratory glass cutter